- ATV[2]
- ATV Parts[1]
- Auto Clutch[1]
- Brake System[5]
- Auto Meter[1]
- Auto Motor[6]
- Auto Sensors[3]
- Car Amplifiers[1]
- Car Black Box[2]
- Car Cassette Player[5]
- Car Charger[1]
- Car Fridges[1]
- Engine Assembly[3]
- Engine Mounts[2]
- Exhaust System[3]
- New Cars[1]
- Used Cars[1]
- Air Conditioning System[1]
- Car Fenders[1]
- Car Grills[2]
- Car Windows[1]
- Door Locks[1]
- Car Polishers[3]
- Other Car Care Equipment[2]
- Spray Booths[1]
- Coolant[1]
- Fuel Additives[3]
- Car Wash Brushes[1]
- Ratchet Buckle[1]
- Tire Covers[1]
- Motorcycle Body Kits[1]
- Motorcycle Shock Absorber[1]
- Other Auto Parts[5]
- Emergency Tools[1]
- Cables[1]
- Camera Filters[1]
- Battery Packs[1]
- Gas Turbine Generators[1]
- Gasoline Generators[1]
- Power Accessories[1]
- Other Switches[1]
- Transformers[1]
- Electrical Wires[2]
- Other Wires[2]
- Insulation Materials & Elements[2]
- Other Electronic Accessories[2]
- Other Electronic Components[2]
- Mobile Phone Batteries[2]
- Mobile Phones[1]
Products List
Polyimide Silicone Adhesive Tape
Thickness:0.05mm
Width:5mm
Length:33m
ID:40mm
This product is made from polyimide film painted with F grade thermosetting and pressure-sensitive adhesive on single surface. There will be thermosetting at the temperature of 170-180°C for 3-4 hours. It can be used for H grade...
Polyimide Film with FEP Coating on Both Sides
Polyimide Film with FEP Coating on Both Sides
TJ6251 Polyimide Film Adhesive Tape F46Standard No.: Q/12YJ4214Applicable Range: This product is the tape with ground of polyimide film manufactured by “doctor-blading process”, single surface or double surfaces covered with glue...
Polyimide Film with FEP Coating on Both Sides
Polyimide Film with FEP Coating on Both Sides
TJ6251 Polyimide Film Adhesive Tape F46Standard No.: Q/12YJ4214Applicable Range: This product is the tape with ground of polyimide film manufactured by “doctor-blading process”, single surface or double surfaces covered with glue...
Polyimide Film with FEP Coating on Both Sides
Polyimide Film with FEP Coating on Both Sides. Itprovides a moisture barrier, and enhances chemical resistantce
TJ6251 Polyimide Film Adhesive Tape F46Standard No.: Q/12YJ4214Applicable Range: This product is the tape with ground of polyimide film manufactured by “doctor-blading...
Polyimide Film with FEP Coating on Single Side
Thickness:0.05mm
Width:8mm
Length:2000m
ID:40mm
OD:280mm
This product is made from polyimide film painted with F46 adhesive on single surface or double surface and cut after drying. It is applied as insulation material for electrical wire winding, which is molded through melting at...
Polyimide FEP Adhesive Tape
Polyimide FEP Adhesive Tape
Thickness:0.0375mm
Width:15mm
Length:1000m
Polyimide FEP Adhesive TapeTJ6251 Polyimide Film Adhesive Tape F46Standard No.: Q/12YJ4214Applicable Range: This product is the tape with ground of polyimide film manufactured by “doctor-blading...
Polyimide Film with FEP Coating on Both Sides
Thickness:0.05mm
Width:8mm
Length:2000m
TJ6251 Polyimide Film Adhesive Tape F46 Standard No.: Q/12YJ4214Applicable Range: This product is the tape with ground of polyimide film manufactured by doctor-blading process, single surface or double surfaces covered with glue F46, and...
Polyimide Film with FEP Coating on Single Side
Thickness:0.0375mm
Width:10.5mm
Length:2000m
ID:50mm
OD:280mm
I. Technological requirement:1. Appearance: The tape is dry, smooth as well as free from any bubble or impurity, etc.2. Dimension:1) Length: The length of every roll of tape is not less than 300 m and the number of...
Polyimide Acrylic Adhesive Tape
Polyimide Acrylic Adhesive Tape
Thickness:0.08mm
Width: 50mm
Length:20m
Polyimide Acrylic Adhesive Tape This kind of tape is made of polyimide material with acrylic adhesive, which shows excellent dielectric insulation properties, high heat resistant and is widely used for...
Polyimide Silicone Adhesive Tape
Thickness:0.06mm
Width:4mm
Length:50m
This product is made from polyimide film painted with F grade thermosetting and pressure-sensitive adhesive on single surface. There will be thermosetting at the temperature of 170-180°C for 3-4 hours. It can be used for H grade insulation of...